Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 100mm forks - Flange diameter: 58mm - NDS flange offset: 20.5mm - DS flange offset: 32.75mm - 28 hole, 6-bolt rotor
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length) - Choose 70mm or 90mm drum brake front hub (brake lever sold separately)
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
$116.99 - $143.99
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz
SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 150mm forks - Flange diameter: 58mm - NDS flange offset: 45mm - DS flange offset: 53.5mm - 32 hole, 6-bolt rotor
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
Direct power meets simplicity—running smoothly day-in and day-out. Classic Track hubs are the right choice if it's about all-out sprinting and precise lap times. With their threaded axles and the proven DT Swiss bearing technology, they feel right at home racing on the track or navigating dense city traffic on a fixie. - Net weight: 271g - Application: Track - Material: Aluminum - Brake interface: Non-disc - Axle system: 9mm Nutted - Over locknut dimension (O.L.D.): 100mm - Number of holes: 20
An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.
Alloy Shimano Micro Spline Freehub Body for HEX rear hubs. - Compatibility: HEX J-TYPE/HEX STRAIGHT-PULL Rear Hubs - Includes: Spacer ring, conversion spacer, and 3 bearings - Material: alloy - Weight: 108g
- Micro Spline freehub for Oozy/Spike rear hubs - Material: steel
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Page 1 of 3 Next page