Pumps/Inflation

Get your Airstik SL fresh and ready for the ride with its Airstik SL Rebuild kit.

Refills … Get your refills here! - Threaded - 16 gram - 3 pack

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- 1.5'' pressure gauge - DualHead head fits Schrader / Presta - Bleed valve - 160 psi maximum pressure

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty

- Alloy spring actuated head - 16g threaded CO2 cartridges - EVA foam protectors for cartridges

Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

Get back on the road fast with Control Blast 0. Featuring a reversible head for Presta & Schrader with a valve knob which unwinds to apply just the right amount of pressure. Features - Easy fill rate control knob - Threaded Presta and Schrader valve compatible system - Alloy construction - Head only (cartridge not included) - Compatible with threaded cartridges

- Easy fill rate control knob. - Threaded Presta and Schrader valve compatible system. - Aluminum. - Includes 1 16g threaded CO2 cartridge.

Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb

Refills … get your refills here! - Threaded - 25 gram - 3-pack

The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves

Our slickest, most simple CO2 inflator. Insert the CO2 cartridge into the inflator, and twist the cup. Presto you are ready to inflate! *This inflator works with both threaded and non-threaded 16g cartridges. - Durable CNC alloy valve head is constructed to last a lifetime - Accepts both Presta and Schrader valves automatically - Cupped inflator design keeps your hand from freezing as the CO2 canister discharges - Soft touch finish provides better grip when twisting the barrel - 55 grams

High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Compact and powerful, this dual-action pump helps you quickly pump up tires without breaking a sweat. The magic is in the dual-action design, which pumps air into a tire on both push and pull strokes. A great choice for road riders of all types. Details: - Dual stroke design pumps on both inward and outward strokes - AnyValve Pump Head - Tough, lightweight aluminum barrel - Ergonomic folding T-handle - Includes cage mount - 160 psi max pressure - 137g / 0.30lbs

If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

- 1.25" gauge - Pinch-Free T-handle - Reversible head for Presta or Schrader - 120 PSI Max

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

For almost two decades, the Mammoth has established itself as a well-known standard for mountain bike mini-pumps. And with the rubberized t-handle and AnyValve head that auto-adapts to Presta, Schrader, and Dunlop valves, it’s even better than its legendary forebears. - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internals - Tough, lightweight aluminum barrel - Rubberized folding t-handle - Includes cage mount - 90 psi max pressure - 157g / 0.34lbs

Floor pump nylon braided hose with an included ABS1 Pro chuck, compatible with the Pressure Overdrive and Digital Pressure Overdrive.

Giant's Control Mini CO2 Pump boasts a lightweight aluminum barrel that doubles as a micro-sized pump and CO2 inflator. It holds two CO2 cartridges when attached to your bike with the mount, handles all valve types, and pumps up to 120psi into your tires.

- Rotatable 1.25” gauge - Pinch-Free T-handle design - High Pressure/High Volume switchable system - Fold out foot pad for fast, stable inflation - Roller System valve head eliminates twisting while threading onto valve - 120 PSI Max

Giant's Control Mini Pocket Pump fits so easily into your jersey pocket that you're liable to forget it's there; that is, until you need it. Then you have 120psi at your fingertips with a reversible head that fits any type of valve. This pump has an aluminum body that telescopes into itself for a compact fit so it can travel with you on every bike ride.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

The pull-out hose puts less stress on the valve. And you weren't stressed to start with. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. Blackburn's Presta-only head sits on a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Thread on pump head automatically adapts to Presta valves - Rebuildable internals parts available aftermarket - Flexible hose - Includes Presta valve tool - Frame mount included - 120 PSI, 8.2 Bar maximum - Weight: 127 grams

- Tall 25-inch alloy barrel with SureFoot steel base - UnoHead Comp head fits Schrader / Presta - 3-inch low-profile Accurite gauge | 160 psi / 11 bar - 36-inch replaceable rubber hose - Ergonomic V-handle - Integrated storage for ball and toy adapters

Sturdy Steel Barrel, Large Gauge Built To Last Made with a bombproof steel barrel and base, the Piston 2 is built to last. Which is good, because with its extra large 3” gauge and versatile Anyvalve pump head, this is a pump you'll never get tired of using. - Extra Long 38" Hose To Reach Valves In Stands Or Car Racks. - Convenient Integrated Hose Keeper On Handle. - Psi And Bar Increments On Gauge, With Vibrant Color Matched Background. - 160 Psi, 11.0 Bar Maximum

Classic shock. The new Control Shock 1 features a classic 1.6” analog classic design with 400psi maximum pressure. Two-stage valve technology ensures that you won’t lose air when disconnecting the pump. And our extended valve head design makes it easier to access tight valve locations. Features - CNC machined aluminum barrel - Aluminum housing and gauge - 1.6” diameter pressure gauge - Air pressure release button - Extended Valve Head Design - Two Stage Valve - 400psi Max